How To Clean My Canon 7d Mark 2 Camera And Lenses

Solution

If you cannot remove dirt or dust on the prototype sensor (CMOS) fifty-fifty past using the sensor cleaning function on your camera, or if your photographic camera does non have a function for sensor cleaning, yous tin clean the sensor on your ain by using a commercially bachelor blower.

Of import

The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, information technology is advisable to contact a Canon Service Center.

CAUTION

For the power source, using an Air-conditioning Adapter Kit ACK- E6 (sold separately) is recommended.
If yous use a battery, brand sure information technology is fully recharged. If the Battery Grip BG-E16 (sold separately) with size-AA/LR6 batteries is fastened, manual sensor cleaning will not be possible.

one. Detach the lens before you showtime cleaning.

two. Ready the power switch to [ON].

3. Press the [Bill of fare] push to bring up the menu brandish.

4. Under the [ ] (Set-up) tab, select [Sensor cleaning], then printing [ ].

5. Press the [ ], [ ] keys to select [Clean manually], then printing [ ].

half-dozen. Press the [ ] key to select [OK], then press [ ].

7. The reflex mirror will lockup and the shutter volition open up.

"CLn" will blink on the LCD console.

eight. Using a commercially bachelor blower, blow grit that is stuck to the surface while preventing the blower from directly touching the sensor.

9. After cleaning, ready the power switch to [OFF].

Circumspection

While cleaning the sensor, never do whatsoever of the following. If the power is cut off, the shutter will shut and the shutter curtains and image sensor might get damaged.

- Setting the power switch to <OFF>.

- Opening the battery compartment cover.

- Opening the card slot embrace.

The surface of the paradigm sensor is extremely delicate. Clean the sensor with intendance.
Use a evidently blower without whatever brush fastened. A castor tin scratch the sensor.
Do not insert the blower tip inside the camera beyond the lens mount. If the power is turned off, the shutter will close and the shutter curtains or reflex mirror might get damaged.
Never use canned air or gas to clean the sensor. The blowing forcefulness can damage the sensor or the spray gas tin freeze on the sensor.
If the bombardment level becomes depression while you clean the sensor, the beeper volition sound equally a alert. Stop cleaning the sensor.
If a smudge that cannot be removed with a blower remains, having the sensor cleaned by a Canon Service Middle is recommended.

Source: https://ph.canon/en/support/8202664000

Posted by: childfrichis.blogspot.com